Windshield Washer Pump

WINDSHIELD WASHER PUMP

REMOVAL
1. Remove the RH front wheel.







2. Remove the four screws, the pin-type retainer and remove the RH front inner fender well.







3. WARNING: Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.

NOTE: The windshield washer reservoir will drain when the washer hose is disconnected.

Disconnect the washer hose and the electrical connector from the washer pump.







4. Remove the washer pump assembly by prying the pump out of the reservoir cavity with a small flat blade screwdriver.

INSTALLATION
1. To install, reverse the removal procedure.