EGR Tube: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE TUBE







Exploded View







Removal and Installation

1. WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire Suppression System.

With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the 2 bolts and the intake manifold shield.
- To install, tighten to 12 Nm (9 lb-ft).

3. Disconnect the tube fitting at the exhaust gas recirculation (EGR) system module.
- To install, tighten to 40 Nm (30 lb-ft).

4. Disconnect the EGR tube nut at the exhaust manifold.
- To install, tighten to 40 Nm (30 lb-ft).

5. Remove the EGR tube from the vehicle.

6. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System.

To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.