Rear Door Window Regulator

REAR DOOR WINDOW REGULATOR

Special Tool(s):

Special Tool(s)

Removal and Installation
1. Remove the rear door window glass.
2. Remove the 2 rivets and the pull handle retainer bracket.
3. Disconnect the rear door window regulator motor electrical connector.







4. Remove the 2 rear door window regulator rivets.
5. Remove the 2 rear door window regulator nuts.
- To install, tighten to 6 Nm (53 lb-in).







6. Remove the 3 rear door window regulator motor bolts and the rear door window regulator.
- To install, tighten to 6 Nm (53 lb-in).

7. To install, reverse the removal procedure.
- Use the special tool to install the rivets.