Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2006 >> E 450 V8-5.4L VIN L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Leak Detection Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Leak Detection Valve: Service and Repair

EVAPORATIVE EMISSION CANISTER VENT SOLENOID


Aft Of Axle Fuel Tank:






Midship Fuel Tank (Part 1):






Midship Fuel Tank (Part 2):






Exploded View

Removal and Installation

NOTE: Midship fuel tank evaporative emission (EVAP) canister vent solenoid shown, aft of axle fuel tanks EVAP canister vent solenoid similar.

1. Remove the evaporative emission (EVAP) canister.







2. NOTE:
- Inspect and install new O-ring seals as necessary.
- A twisting and pulling motion is necessary to remove the evaporative emission canister vent solenoid.

Disconnect the electrical connector and the evaporative emissions hose and remove the canister vent solenoid.

3. NOTE: Lubricate the O-ring seals with clean engine oil.

To install, reverse the removal procedure.
- Carry out the evaporative emission system leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle
pro multis · About Operation CHARM