Floor Console

FLOOR CONSOLE







Removal and Installation

All vehicles
1. Position the seats FORWARD and remove the 2 rear bolts.
2. Position the seats REARWARD and disconnect the battery.
3. Position the parking brake handle to the full-up position, if equipped.
4. Release the parking brake handle boot from the floor console finish panel, if equipped.

Fusion, Milan
5. Remove the trinket tray.
- Disconnect the electrical connector.

6. Remove the floor finish panel trim ring.

All vehicles
7. Remove the floor console finish panel.
- Disconnect the electrical connectors.

8. Remove the 2 bolt covers.
9. Remove the remaining 4 bolts and remove the floor console.
10. To install, reverse the removal procedure.