Selector Lever

Selector Lever

Selector Lever:

Removal
1. Remove the center console. For additional information, refer to Console.





2. Disconnect the selector lever cable end from the selector lever.





3. Release the tab on the selector lever cable and remove it from the selector lever housing.





4. Disconnect the electrical connector.





5. Remove the 4 nuts and remove the selector lever.

Installation





1. Install the selector lever and the 4 nuts.
^ Tighten to 12 Nm (9 ft. lbs.).





2. Connect the electrical connector.





3. Install the selector lever cable in the selector lever housing.





4. Connect the selector lever cable end to the selector lever.
5. Install the center console. For additional information, refer to Console.
6. Adjust the shift cable.