Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2006 >> Ranger 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)







Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the powertrain control module (PCM) wiring harness retainer nut.
- To install, tighten to 10 Nm (89 lb-in).

3. Loosen the bolt and disconnect the PCM electrical connector.
- To install, tighten to 7 Nm (62 lb-in).

4. Remove the stud bolt and position aside the ground cable and PCM wiring harness.
- To install, tighten to 10 Nm (89 lb-in).

5. Remove the 2 nuts and the PCM cover.
- To install, tighten to 7 Nm (62 lb-in).

6. Remove the PCM.
7. To install, reverse the removal procedure.
pro multis · About Operation CHARM