Torque Specifications

Torque Specifications





















1. NOTE: Lubricate the main bearing beam bolts threads and under the bolt heads with clean engine oil. Overhaul Step 17.

NOTE: Position the crankshaft to the rear of the cylinder block, then position the crankshaft to the front of the cylinder block before tightening the main bearing beam bolts.

Install and tighten the 10 main bearing beam bolts.
^ Tighten the bolts in the sequence shown in 3 stages.
^ Stage 1: Tighten to 5 Nm (44 lb-in).
^ Stage 2: Tighten to 25 Nm (18 lb-ft).
^ Stage 3: Tighten an additional 90 degrees.