Shift Interlock Cable: Service and Repair

Selector Lever Cable and Bracket








Removal and Installation





1. Disconnect the transmission shift cable from thee steering column.
1 Disconnect the shift cable from the transmission column shift selector tube.
2 Disconnect the shift cable from the steering column bracket.
2. Push the rubber grommet and shift cable through the bulkhead.
3. Position the vehicle on hoist.





4. Remove the transmission shift cable from the automatic transmission.
1 Disconnect the shift cable from the manual control lever.
2 Remove the clip that keeps the lock tabs from being depressed.
3 Depress the lock tabs to release the shift cable and disconnect the shift cable from the shift cable bracket.





5. Remove the transmission shift cable bracket from the automatic transmission.
1 Remove the bolts.
2 Remove the transmission shift cable bracket.





6. To install, reverse the removal procedure.
^ Tighten to 25 Nm (18 ft. lbs.).
^ Move manual lever into the OVERDRIVE position.
^ Adjust the transmission shift cable.