Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> E 250 V8-5.4L >> Repair and Diagnosis >> Brakes and Traction Control >> Brake Pedal Assy >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Assy: Service and Repair

Brake Pedal and Bracket

Brake Pedal and Bracket:





Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Release the fuse block assembly from the brake pedal bracket and position aside.





3. Disconnect the brake booster push rod.
^ Remove the brake pedal cotter pin cover.
^ Remove the brake pedal cotter pin.
^ Remove the stoplamp switch.
^ Remove the brake booster push rod bushing.
^ Disconnect the brake booster push rod from the brake pedal pin.
4. Remove the 2 brake pedal bracket nuts.
^ To install, tighten to 25 Nm (18 ft. lbs).
5. Remove the 4 brake booster nuts.
^ To install, tighten to 25 Nm (18 ft. lbs).
6. Remove the brake pedal and bracket assembly.
7. To install, reverse the removal procedure.
pro multis · About Operation CHARM