Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> E 250 V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Canister Purge Control Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Canister Purge Control Valve: Service and Repair

EVAPORATIVE EMISSION CANISTER PURGE VALVE


Aft-Of-Axle Fuel Tank (Part 1):






Aft-Of-Axle Fuel Tank (Part 2):






Midship Fuel Tank (Part 1):






Midship Fuel Tank (Part 2):






Exploded View

Removal and Installation

1. WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark occurring, possibly causing a fire or explosion if fuel vapor or liquid fuel is present in the area. Failure to follow these instructions may result in personal injury.

Disconnect the battery ground cable.

2. Remove the engine cover.







3. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector and the EVAP tubes quick connect couplings.







4. Press the tab and remove the EVAP canister purge valve.
5. To install, reverse the removal procedure.
- Carry out the evaporative emission system leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle
pro multis · About Operation CHARM