Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> E 350 V8-6.0L DSL Turbo >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair

Ignition Switch

Removal and Installation

Ignition Switch:





1. Depower the supplemental restraint system (SRS). For additional information, refer to Air Bag Systems.
2. Pull the steering column opening cover off the lower instrument panel.





3. Disconnect the ignition switch electrical connector.
4. Remove the 2 ignition switch screws and the ignition switch.
^ To install, align the ignition switch with the slot and index mark on the steering column and tighten the screws to 6 Nm (53 inch lbs.)
5. To install, reverse the removal procedure.
6. Repower the supplemental restraint system (SRS). For additional information, refer to Air Bag Systems.
pro multis · About Operation CHARM