Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the output shaft speed (OSS) sensor electrical connector.





3. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of foreign material to prevent contamination of the transmission.

Remove the OSS sensor.
1 Remove the bolt.
2 Remove the OSS sensor.





Installation
1. Install the OSS sensor.
1 Lubricate the O-ring and install the OSS sensor.
2 Install the bolt.
^ Tighten to 9 Nm (80 inch lbs.)





2. Connect the OSS sensor electrical connector.