Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> E 450 V8-6.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor/Switch: Service and Repair

FUEL INJECTION CONTROL PRESSURE (ICP) SENSOR

Removal and Installation

Vehicles with dual generators
1. Disconnect the negative battery cable.

All vehicles







2. NOTE: The injection control pressure (ICP) sensor is located in the RH valve cover.

Disconnect the ICP sensor electrical connector.







3. Remove the ICP sensor.
- Tightent to 12 Nm (9 lb-ft).

4. To install, reverse the removal procedure.
- Verify the sensor O-ring seal is in place.
pro multis · About Operation CHARM