Instrument Panel Center Finish Panel
INSTRUMENT PANEL - EXPLODED VIEWEdge Instrument Panel (Part 1):
Edge Instrument Panel (Part 2):
Edge Instrument Panel (Part 1):
Edge Instrument Panel (Part 2):
MKX Instrument Panel (Part 1):
MKX Instrument Panel (Part 2):
MKX Instrument Panel (Part 1):
MKX Instrument Panel (Part 2):
INSTRUMENT PANEL CENTER FINISH PANEL
Removal and Installation
All vehicles
1. Place the vehicle in NEUTRAL.
MKX only
2. Remove the floor console trim ring.
All vehicles
3. Remove the floor console finish panel.
- Open the storage compartment door.
- Remove the console finish panel.
MKX only
4. Remove the storage bin.
- Remove the 2 scrivets.
- Disconnect the power point electrical connector.
5. NOTE: The upper and lower center finish panels are removed as one assembly.
Using a suitable tool, gently pry out the upper center finish panel to disengage the clips.
- Disconnect the electrical connectors.
6. Using a suitable tool, gently pry out the lower center finish panel to disengage the clips.
- Disconnect the electrical connectors.
7. Separate the upper finish panel from the lower finish panel.
Edge only
8. NOTE: The upper and lower center finish panels are removed separately.
Using a suitable tool, gently pry out the upper center finish panel to disengage the clips and remove the panel.
- Disconnect the electrical connectors.
9. Using a suitable tool, gently pry out the lower center finish panel to disengage the clips and remove the panel.
- Disconnect the electrical connectors.
All vehicles
10. To install, reverse the removal procedure.