Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disc Removal and Installation, Rear

Brake Disc

Material:








Removal
1. Remove the wheel and tire assembly.

2. CAUTION: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.

Remove the 2 brake caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
^ Support the brake caliper and anchor plate assembly using mechanic's wire.
3. Remove the brake disc.

Installation
1. Clean and dry the brake disc-to-hub mounting surface and apply a thin coat of anti-seize lubricant where indicated.





2. Install the brake disc onto the wheel hub.
3. Position the brake caliper and anchor plate assembly and install the 2 brake caliper anchor plate bolts.
^ Tighten to 55 Nm (41 ft. lbs).
4. Install the wheel and tire assembly.
5. Test the brakes for normal operation.