Rear

Rear Disc Brake
The rear disc brake system consists of these components:

Brake Caliper
The brake caliper is mounted to a brake caliper anchor plate, which is bolted to the brake caliper support plate. The support plate is attached to the trailing arm.

Brake Caliper Anchor Plate
The brake caliper anchor plate uses locating guide pins and bolts to allow the brake caliper to move as the brake pads wear.

Brake Disc
The brake disc is a ventilated full-cast design.

Brake Disc Shield
The brake disc shield is mounted to the brake caliper support bracket and protects the wheel bearing and the inner surface of the brake disc from foreign material.

Brake Pads
The brake pads are of a non-asbestos composition and are housed in the brake caliper.