Muffler: Service and Repair

Muffler and Tailpipe

Removal and Installation

NOTE: Do not use oil or grease-based lubricants on the isolators. They may cause deterioration of the rubber.

NOTE: Oil or grease-based lubricants on the isolators may cause the exhaust hanger isolator to separate from the exhaust hanger bracket during vehicle operation.

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Support the muffler and tailpipe with a suitable jackstand.





3. Remove the Torca(R) clamp.

4. CAUTION: Do not damage or tear the isolators during removal.

Using soapy water, separate the 4 muffler and tailpipe isolators from the vehicle.
5. Separate the muffler and tailpipe from the exhaust flexible pipe and remove the muffler and tailpipe.
6. To install, reverse the removal procedure.
^ Inspect and replace any isolators damaged or torn during the removal process.
7. Start the engine and check for exhaust leaks.