Installation

Power Transfer Unit (PTU)

Power Transfer Unit (PTU):

1. CAUTION: A new power transfer unit (PTU) intermediate shaft seal must be installed whenever the intermediate shaft or PTU is removed from the vehicle.

Position the power transfer unit (PTU) to the transaxle. Install the 5 PTU-to-transaxle bolts.
^ Tighten to 90 Nm (66 ft. lbs).





2. Position the PTU support bracket into place and hand tighten the 5 PTU support bracket bolts.
1 Tighten the bolts to the transaxle.
2 Tighten the bolts to the engine.
^ Tighten to 70 Nm (52 ft. lbs).





3. Install the intermediate shaft.
4. Install the driveshaft.
5. Install the exhaust flex pipe and RH catalytic converter. For additional information, refer to Catalytic Converter.
6. Fill the PTU, if necessary.