Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Edge AWD V6-3.5L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Reservoir: Service and Repair

WASHER RESERVOIR

Removal and Installation
1. Remove the RH front fender splash shield.
2. Disconnect the washer pump electrical connector.

3. NOTE: To prevent spilling windshield washer fluid, drain the washer reservoir before removal.

Disconnect the washer pump hoses.

4. Remove the bolt from the washer reservoir filler neck.
- To install, tighten to 7 Nm (62 lb-in).







5. Remove the washer reservoir nuts and the washer reservoir.
- To install, tighten to 7 Nm (62 lb-in).

6. CAUTION: Do not operate the washer pump prior to filling the washer reservoir. Failure to follow these instructions may result in premature pump failure.

To install, reverse the removal procedure.
- Fill the washer reservoir with windshield washer fluid.
pro multis · About Operation CHARM