Wiper Motor - Rear Window

WIPER MOTOR - REAR WINDOW

Removal
1. Remove the rear wiper pivot arm.
2. Remove the liftgate interior trim panel.
3. Disconnect the rear wiper motor electrical connector.
4. Remove the 3 rear wiper motor screws.
5. Remove the rear wiper motor.

Installation
1. Position the rear wiper motor on the liftgate and install the 3 rear wiper motor screws.
- Tighten to 11 Nm (8 lb-ft).

2. Connect the rear wiper motor electrical connector.
3. Install the liftgate interior trim panel.
4. Install the rear wiper pivot arm.