Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Escape 2WD L4-2.3L VIN Z >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Lumbar Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lumbar Assembly

LUMBAR ASSEMBLY


Part 1:






Part 2:






Exploded View

Removal and Installation

WARNING:
- Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.
- To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:
- If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.
- The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
- The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
- The power seat and manual seat are similar.

1. Depower the supplemental restraint system (SRS).
2. Remove the front seat backrest cover.
3. Remove the front seat backrest cushion.
4. Remove the 2 manual lumbar control screws and the manual lumbar assembly.
- To install, tighten to 3 Nm (27 lb-in).

5. To install, reverse the removal procedure.
6. Install the front seat backrest cover.
7. Repower the supplemental restraint system (SRS).
pro multis · About Operation CHARM