Easy Entry/Exit Feature
EASY ENTRY/EXIT FEATUREThe easy entry/exit feature moves the seat backwards about 2 inches when the ignition key is removed from the ignition switch. The DSM receives a key out command over the MS-CAN communication network and powers the driver seat rearward. This function will not operate if the seat is less than the travel distance to the end of the track or the function has been disabled. The DSM will also cancel this operation if a valid input command is received, such as the seat control switch or memory recall request.
The DSM will record the current seat position before powering the seat for an easy exit operation. This recorded position will be used to return the seat to this position on the easy entry operation. During easy entry operation, the seat is returned to the position previous to the easy exit operation. Easy entry operation will be cancelled if a valid input command is received by the DSM.
The easy entry/exit feature can be disabled and enabled by selecting easy entry on the message center display with the setup control button and pressing the reset control to select on or off from the display menu. Refer to driver controls in the Owner's Literature for additional instructions for using the message center.