Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Explorer 4WD V6-4.0L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mount: Service and Repair

Transmission Support Insulator - Four Wheel Drive (4WD)

Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Support the transmission with a transmission jack.
3. Remove the 2 nuts from the rear transmission support.





4. NOTE: Crossmember and exhaust system shown removed.

NOTE: LH shown, RH similar.

Remove the 2 bolts and remove the rear transmission support.





Installation
1. Install the rear transmission support and bolts.
^ Tighten to 90 Nm (66 ft. lbs.)





2. Lower the rear mount onto the crossmember and tighten the rear transmission support nuts.
^ Tighten to 90 Nm (66 ft. lbs.)




pro multis · About Operation CHARM