Window Regulator - Rear
WINDOW REGULATOR - REARPart 1:
Part 2:
Exploded View
Removal and Installation
1. Remove the cab rear panel.
2. Position the insulator aside.
3. Remove the 8 window regulator cover bolts.
- To install, tighten to 10 Nm (89 lb-in).
4. Remove the window regulator cover to motor bolt.
- To install, tighten to 10 Nm (89 lb-in).
5. Remove the window regulator cover.
6. Remove the 2 window regulator mounting nuts.
- To install, tighten to 10 Nm (89 lb-in).
7. Remove the 2 window regulator to window bolts.
- To install, tighten to 11 Nm (8 lb-ft).
8. Disconnect the electrical connector.
9. Remove the window regulator.
10. To install, reverse the removal procedure.