Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Explorer Sport Trac 2WD V8-4.6L VIN 8 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)







Removal

All vehicles

1. NOTE: Powertrain control module (PCM) installation DOES NOT require new keys.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure.

Vehicles equipped with a 4.6L (3V) engine
2. Remove the air cleaner.


All vehicles







3. Disconnect the RH front wheel speed sensor electrical connector. Remove the nuts and position the A/C tube brackets and wiring harness aside.
4. Disconnect the PCM connectors.
5. Remove the bolts and the PCM.

Installation

All vehicles

1. Install the PCM and bolts.
- Tighten to 10 Nm (89 lb-in).

2. Connect the PCM electrical connectors.







3. Position the wiring harness and the A/C tube brackets and install the nuts. Connect the RH front wheel speed sensor electrical connector.
- Tighten to 7 Nm (62 lb-in).

Vehicles equipped with a 4.6L (3V) engine
4. Install the air cleaner.

All vehicles
5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure.
6. Reprogram the passive anti-theft system (PATS). Carry out the Parameter Reset procedure.
pro multis · About Operation CHARM