Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> F 150 2WD V6-4.2L VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position (CMP) Sensor

CAMSHAFT POSITION (CMP) SENSOR







Removal and Installation
1. Drain the engine cooling system.

2. NOTE: Clean and inspect the heater outlet tube O-ring seal. Install a new O-ring seal if necessary. Lubricate the O-ring seal with clean engine coolant.

Remove the bolt and position the heater outlet tube aside.
- To install, tighten to 10 Nm (89 lb-in).

3. Disconnect the camshaft position (CMP) sensor electrical connector.
4. Remove the bolts and the CMP sensor.
- To install, tighten to 3 Nm (27 lb-in).

5. To install, reverse the removal procedure.
pro multis · About Operation CHARM