Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> F 150 2WD V6-4.2L VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor/Switch: Service and Repair

FUEL RAIL PRESSURE AND TEMPERATURE SENSOR







Removal and Installation
1. Release the fuel system pressure.
2. Disconnect the fuel rail pressure and temperature sensor electrical connector.
3. Disconnect the fuel rail pressure and temperature sensor vacuum connector.
4. Remove the bolts and the fuel rail pressure and temperature sensor.
- To install, tighten to 6 Nm (53 lb-in).

5. Remove and discard the O-ring seal.
- Install a new O-ring seal and lubricate with clean engine oil prior to installation.

6. To install, reverse the removal procedure.
pro multis · About Operation CHARM