Cylinder Head Assembly

Cylinder Head








Stage 1 40 Nm (30 ft. lbs.)
Stage 2 additional 90 degrees
Stage 3 additional 90 degrees

The cylinder head bolts must be discarded and new bolts installed. They are tighten-to-yield designed and cannot be reused.





Intake manifold bolts 10 Nm (89 inch lbs.)





Camshaft bearing cap bolts 10 Nm (89 inch lbs.)

Tighten the camshaft sprocket bolt in 2 stages:
Stage 1 40 Nm (30 ft. lbs.)
Stage 2 additional 90 degrees

LH exhaust manifold 25 Nm (18 ft. lbs.)





RH exhaust manifold 25 Nm (18 ft. lbs.)