Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> F 150 4WD V8-4.6L VIN W >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL AND INSTALLATION

Anti-Lock Brake System (ABS) Module





Removal and Installation

CAUTION: Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to the charges.

CAUTION: When installing a new ABS module or hydraulic control unit (HCU), do not use the pump motor harness as a carrying handle. Failure to follow these instructions may result in damage to the HCU assembly.

All vehicles
1. Disconnect the battery ground cable.

Vehicles equipped with 5.4L engine.
2. Remove the air cleaner intake pipe.

All vehicles
3. Disconnect the ABS module electrical connector.
4. Remove the 4 screws and the ABS module.
^ To install, tighten to 3 Nm (27 inch lbs.).

5. NOTE: The ABS module is not repairable. If an internal problem exists, a new part must be installed.

To install, reverse the removal procedure.
^ When installing a new ABS module, it must be configured (using vehicle as-built data) and calibrated. Follow the scan tool directions for calibration procedures.
pro multis · About Operation CHARM