Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> F 150 4WD V8-4.6L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Pressure Feedback Exhaust Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Feedback Exhaust Sensor: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE







Exploded View

Removal and Installation
1. Disconnect the exhaust gas recirculation (EGR) system module electrical connector.
2. Disconnect the EGR system module vacuum connector.
3. Disconnect the exhaust manifold-to-EGR system module tube from the EGR system module.
4. Remove the bolts, the EGR system module and the gasket. Discard the gasket.

Installation

1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of the old gasket.

Clean the EGR system module gasket mating surfaces.







2. Install a new gasket with the raised circle facing the throttle body (TB) adapter.
3. Position the EGR system module and install the bolts.
- Tighten to 25 Nm (18 lb-ft).

4. Connect the exhaust manifold-to-EGR system module tube the EGR system module.
- Tighten to 40 Nm (30 lb-ft).

5. Connect the EGR system module vacuum connector.
6. Connect the EGR system module electrical connector.
pro multis · About Operation CHARM