Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Focus L4-2.3L VIN Z >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Disassembly and Assembly of Subassemblies >> Main Control Valve Body
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Main Control Valve Body

Main Control Valve Body

Main Control Valve Body (Part 1):




Main Control Valve Body (Part 2):




Main Control Valve Body (Part 3):





Disassembly
1. Remove the solenoid body bolts and the solenoid body.





2. Remove and discard the solenoid body gaskets.





3. Remove and discard the seals.





4. Disassemble the main control valve body.





Assembly

1. NOTE: The top side of the separator plate has a bonded gasket.

NOTE: The separator gasket goes on the bottom side.

NOTE: Inspect the main control valve body.

Install new control valve body plate assembly and separator gaskets.





2. NOTE: Do not fully tighten the bolts at this stage.

Assemble the main control valve body and loosely install the bolts.





3. Install the seals.





4. Install a new solenoid body gasket.





5. Install the solenoid body and loosely install the bolts.





6. Tighten the solenoid body bolts in the sequence shown.
^ Tighten to 9 Nm (80 inch lbs.).




pro multis · About Operation CHARM