Shifter M/T: Service and Repair

Gearshift Lever
Removal and Installation
1. Remove the gearshift cover.
1. Unclip the cover from the console.
2. Remove the gearshift lever knob.





2. Remove the floor console.
3. Remove the shift cables from the gearshift levers.
1. Carefully pry the gearshift cables from the shift levers.
2. Rotate the abutment sleeve clockwise and detach the shift cable from the bracket.





4. Remove the 4 gearshift lever bolts and the gearshift lever.





5. To install, reverse the removal procedure.
^ Tighten to 9 Nm (80 inch lbs.).
^ Adjust the gearshift and selector cables.