Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Freestar V6-4.2L VIN 2 >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Power Trunk / Liftgate Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Trunk / Liftgate Control Module: Service and Repair

POWER LIFTGATE MODULE







Removal and Installation
1. Remove the LH sliding door scuff plate and position aside the weatherstrip.
2. Remove the liftgate scuff panel.
3. Remove the screws and the luggage hold-down retainers.

4. NOTE: The 3rd row seat must be folded flat to allow the LH quarter trim panel to be positioned aside.

Carefully position aside the LH quarter trim panel.

5. Disconnect the power liftgate module electrical connectors.
6. Remove the power liftgate module nut and power liftgate module.
- Tighten to 5 Nm (44 lb-in).

7. To install, reverse the removal procedures.
- Initialize the power liftgate system.
pro multis · About Operation CHARM