Rear

Rear Disc Brake
The rear disc brake system consists of the following components:

Brake Caliper
The brake caliper is mounted to a brake caliper anchor plate, which is bolted to the wheel knuckle.

Brake Caliper Anchor Plate
The brake caliper anchor plate uses locating guide pins and bolts to allow the brake caliper to move as the brake pads wear.

Brake Disc
The brake disc is a non-ventilated full-cast design.

Brake Disc Shield
The brake disc shield is mounted to the wheel knuckle and protects the wheel bearing and the inner surface of the brake disc from foreign material.

Brake Pads
The brake pads are of a non-asbestos composition and are housed in the brake caliper anchor plate.