Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Mustang V8-4.6L VIN H >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Service and Repair

SPEED CONTROL DEACTIVATOR SWITCH


Speed Control Deactivator Switch - Brake Pedal:






Speed Control Deactivator Switch - Clutch Pedal:






Removal and Installation

CAUTION: Do not service the brake pedal, brake booster, or master cylinder without first removing the stoplamp switch. Do not install the stoplamp switch without the brake pedal arm secured to the brake booster push rod. Do not press or pull on the brake pedal when installing or removing the stoplamp switch otherwise misadjustment or damage to the stoplamp switch could occur.

NOTE: This procedure is for both speed control deactivator switches.

1. CAUTION: Do not press the pedal when removing or installing the speed control deactivator switch, as the switch will be damaged.

Remove the speed control deactivator switch.
- Disconnect the electrical connector.
- Rotate the speed control deactivator switch counterclockwise 45 degrees and remove the deactivator switch.

2. NOTE: When installing the speed control deactivator switch, it is automatically self-adjusting to the proper position. Do not pull up or push down on the pedal during installation. Initial installation of the speed control deactivator switch allows for one adjustment. If additional adjustments are necessary, install a new switch.

To install, reverse the removal procedure.
pro multis · About Operation CHARM