Windshield Washer Pump: Service and Repair

WASHER PUMP AND RESERVOIR

Windshield Washer Pump and Fluid Reservoir Exploded View:

Removal and Installation

Windshield washer pump or fluid reservoir

WARNING: Windshield washer solution contains methanol, which is poisonous and flammable. Observe all cautions and warnings indicated on the label of the washer solution container. Failure to follow these instructions could result in personal injury.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect windshield washer pump hose and drain the windshield washer solvent.
3. Disconnect the windshield washer pump electrical connector.

Windshield washer pump only
4. Remove the windshield washer pump.

Windshield washer fluid reservoir
5. Remove the 2 windshield washer fluid reservoir bolts.
- To install, tighten to 6 Nm (53 lb-in).

6. Remove the nut and the windshield washer fluid reservoir.
- To install, tighten to 6 Nm (53 lb-in).

Windshield washer pump or fluid reservoir

7. CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir.

To install, reverse the removal procedure.