Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Crown Victoria V8-4.6L Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor (HO2S)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Oxygen Sensor (HO2S)

HEATED OXYGEN SENSOR (HO2S)

Exploded View







Special Tool(s)


Special Tool(s):






Removal and Installation

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire Suppression System. Failure to follow the instructions may result in serious personal injury.

With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the right side heated oxygen sensor (HO2S) electrical connector.







3. Disconnect the left side HO2S electrical connector.







4. Using the special tool, remove the RH or LH HO2S as necessary.
- To install, tighten to 40 Nm (30 lb-ft).







5. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.

To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.
- Apply a light coat of anti-seize lubricant to the threads of the HO2S.
pro multis · About Operation CHARM