Crankshaft, Engine

Crankshaft
Main bearing journal
Diameter 67.483-67.503 mm (2.6568-2.6576 inch)
Maximum taper 0.004 mm (0.0002 inch)
Maximum-out-of-round 0.0075 mm (0.0003 inch) between cross sections
Clearance-to-cylinder block 0.066-0.024 mm (0.0259-0.0009 inch)
Connecting rod journal
Diameter 53.003-52.983 mm (2.0867-2.0859 inch)
Maximum taper (straightness) 0.004 mm (0.0002 inch)
Maximum-out-of-round 0.0075 mm (0.0003 inch) between cross sections
Maximum end play 0.301 mm (0.0118 inch)

Jack Screws





First pass 5 Nm (44 lb-in).
Final pass 10 Nm (89 lb-in).

Side Bolts
Discard the bolts.





First pass 10 Nm (89 lb-in).
Final pass 21 Nm (15 lb-ft).

Lower Bolts
Discard the bolts.





First pass 40 Nm (30 lb-ft).
Final pass Tighten an additional 90°

Crankshaft Main Bearing Codes