Test G: Intermittent No High Speed Controller Area Network (HS-CAN) Communication, One Or More Modules Are Not Responding Durin

PINPOINT TEST G: INTERMITTENT NO HIGH SPEED CONTROLLER AREA NETWORK (HS-CAN) COMMUNICATION, ONE OR MORE MODULES ARE NOT RESPONDING DURING THE NETWORK TEST

Normal Operation
An open in circuit VDB04 (WH/BU) (HS-CAN +) or VDB05 (WH) (HS-CAN -) may cause intermittent or unreliable communication to all modules on the high speed controller area network (HS-CAN). The HS-CAN is used for communication between the following modules:
- ABS module
- Instrument cluster (IC)
- PCM
- Restraints control module (RCM)

In the event that either circuit VDB04 (WH/BU) or VDB05 (WH) becomes open to any module on the network, unreliable network communication to all modules on the network may result.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors

G1-G2:

G3-G6:

G7-G8: