Rocker Arm Assembly: Service and Repair
Camshaft Roller FollowerValve Train Components - LH (Part 1):
Valve Train Components - LH (Part 2):
Valve Train Components - RH:
Special Tool(s):
Material:
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the LH and RH valve covers.
3. CAUTION: Only use hand tools when removing or installing the spark plugs or damage may occur to the cylinder head or spark plug.
Remove the 6 spark plugs.
^ To install, tighten to 15 Nm (11 lb-ft).
4. Remove the RH splash shield.
^ To install, tighten to 9 Nm (80 lb-in).
5. Rotate the crankshaft until the camshaft lobe is pointing directly away from the roller follower.
6. Using the special tool, remove the roller followers.
7. NOTE: Lubricate the camshaft followers with clean engine oil.
To install, reverse the removal procedure.