Front Fender: Service and Repair

FENDER

Exploded View







Removal and Installation

LH or RH fenders
1. Remove the front bumper cover.
2. Remove the fender splash shield.
3. If equipped, remove the rocker panel moulding.

RH fender
4. Remove the antenna mast and the antenna base fender grommet.







LH or RH fenders
5. Remove the 2 lower rear fender bolts.
- To install, tighten to 11 Nm (8 lb-ft).







6. NOTE: The front door must be open to gain access to the upper rear fender bolt.

Remove the upper rear fender bolt.
- To install, tighten to 11 Nm (8 lb-ft).







7. Remove the lower front fender bolts.
- To install, tighten to 11 Nm (8 lb-ft).







8. NOTE: On the RH side, the antenna base is mounted to the body inside the fender opening. The RH fender must be lifted over the base during removal.

Remove the 3 upper fender bolts and the front fender.
- To install, tighten to 11 Nm (8 lb-ft).







9. To install, reverse the removal procedure.