Lumbar Assembly

LUMBAR ASSEMBLY

Exploded View

Seat Backrest - Front (Part 1):

Seat Backrest - Front (Part 2):

Seat Cushion - Driver (Part 1):

Seat Cushion - Driver (Part 2):

Seat Cushion - Front, Passenger (Part 1):

Seat Cushion - Front, Passenger (Part 2):

Removal and Installation

NOTE:
- The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
- The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

1. Depower the SRS.
2. Remove the backrest trim cover.
3. Remove the backrest foam pad.
4. Remove the 2 screws and position aside the lumbar adjust control.
5. Release the lumbar support from the backrest frame wires and remove.
6. To install, reverse the removal procedure.
7. Install the front seat backrest trim cover.
8. Repower the SRS.