EGR Tube: Service and Repair

EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Carefully detach the differential pressure feedback EGR sensor from the EGR valve tube and position aside.
2. Disconnect the exhaust manifold-to-EGR valve tube fitting from the EGR valve.
- To install, tighten to 40 Nm (30 lb-ft).

3. Disconnect the exhaust manifold-to-EGR valve tube fitting from the RH catalytic convertor.
- To install, tighten to 40 Nm (30 lb-ft).

4. Remove the EGR valve tube.
5. To install, reverse the removal procedure.