Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Escape 4WD V6-3.0L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Motor: Service and Repair

STARTER MOTOR












Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the air cleaner.
3. Disconnect the transmission shift cable-to-manual lever.
4. Remove the 2 transmission cable bracket bolts and detach the wire harness retainer and position aside the transmission cable and bracket.
- To install, tighten to 23 Nm (17 lb-ft).

5. Remove the starter motor solenoid wire nut.
- To install, tighten to 5 Nm (44 lb-in).

6. Remove the starter motor solenoid battery cable nut and position aside the cables.
- To install, tighten to 12 Nm (9 lb-ft).

7. Remove the 2 bolts and the starter motor.
- To install, tighten to 27 Nm (20 lb-ft).

8. To install, reverse the removal procedure.
pro multis · About Operation CHARM