Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Escape 4WD V6-3.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shifter M/T >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shifter M/T: Service and Repair

Gearshift Lever

Gearshift Lever:





Removal
1. Remove the gearshift lever knob and boot assembly.
2. Remove the floor console finish panel.
3. Remove the 2 gearshift cable clips.





4. Carefully disconnect the gearshift cables from the gearshift lever.
5. Remove the 4 gearshift lever nuts.
6. Remove the gearshift lever.

Installation
1. Position the gearshift lever.
2. Connect the gearshift cables to the gearshift lever.








3. CAUTION: Make sure the clips are set completely within the cable adapter groove and fully seated.

Install the 2 gearshift cable clips.





4. Install the 4 gearshift lever nuts.
^ Tighten to 25 Nm (18 lb-ft).

5. Adjust the gearshift cables.
6. Install the floor console finish panel.
7. Install the gearshift lever knob and boot assembly.
pro multis · About Operation CHARM