Rocker Arm Assembly: Service and Repair

Camshaft Roller Follower














Removal and Installation
1. Remove the LH and RH valve covers.
2. Remove the fuel rail. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the cooling fan. For additional information, refer to Cooling System.
4. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.





5. NOTE: Mark each camshaft roller follower to make sure it is returned to its original position.

Using the special tool, remove the camshaft roller followers.





6. NOTE: The camshaft roller followers must be installed in their original positions.

NOTE: Lubricate the camshaft roller followers with clean engine oil.

To install, reverse the removal procedure.