Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Explorer 2WD V6-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Selector Lever Bezel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Selector Lever Bezel

Selector Lever Bezel

Selector Lever Bezel:





Removal
1. Remove the front floor console.
2. Disconnect the transmission control (TC) switch electrical connector and feed the wire through the selector lever housing.





3. Slide the selector lever knob lower trim cover downward.





4. Remove the set screw and remove the selector lever knob while routing the TC switch harness out of the selector lever housing.





5. Remove the selector lever bezel from the selector lever housing.





Installation
1. Install the selector lever bezel onto the selector lever housing.





2. CAUTION: Do not overtighten the set screw or damage to the selector lever knob may occur.

Install the selector lever knob and set screw while routing the TC switch harness through the selector lever housing.
^ Tighten to 3 Nm (27 lb-inch).





3. Slide the selector lever lower trim cover upward.





4. Feed the wire through the selector lever housing and connect the TC switch electrical connector.





5. Install the front floor console.
pro multis · About Operation CHARM