Seat Latch: Service and Repair
SEAT LATCH STRIKER - SECOND ROW, 60 PERCENT BENCHExploded View
Second Row, 60 Percent E-Z Entry Backrest (Part 1):
Second Row, 60 Percent E-Z Entry Backrest (Part 2):
Second Row, 60 Percent, E-Z Entry Cushion (Part 1):
Second Row, 60 Percent, E-Z Entry Cushion (Part 2):
Second Row, 40 Percent E-Z Entry Backrest:
Second Row, 40 Percent, E-Z Entry Cushion (Part 1):
Second Row, 40 Percent, E-Z Entry Cushion (Part 2):
Second Row, Bucket, Backrest:
Second Row, Bucket, Cushion (Part 1):
Second Row, Bucket, Cushion (Part 2):
Second Row, 60 Percent Bench, Backrest:
Second Row, 60 Percent Bench, Cushion:
Second Row, 40 Percent Bench, Backrest:
Second Row, 40 Percent Bench, Cushion:
Removal and Installation
1. Fold the rear 60 percent and 40 percent seat backrests forward.
2. Remove the 2 screws from the storage compartment.
3. NOTE: When separating the cab rear trim panel, start in the upper left corner, moving clockwise and separate the panel from the retaining clips.
Pull to release the clips and position the cab rear trim panel forward to access the seat latch striker.
4. Remove the 2 bolts and remove the striker.
- To install, tighten to 30 Nm (22 lb-ft).
5. To install, reverse the removal procedure.