Seat Temperature Switch: Service and Repair

SEAT CONTROL SWITCH

Exploded View

Front Seat Backrest - With Seat Integrated Restraints (SIR):

Front Seat Backrest - Without Seat Integrated Restraints (SIR):

Front Seat Cushion - Driver (Part 1):

Front Seat Cushion - Driver (Part 2):

Front Seat Cushion - Passenger (Part 1):

Front Seat Cushion - Passenger (Part 2):

Removal and Installation
1. Disconnect the seat control switch electrical connector.
2. Remove the recliner handle.
- Release the clip at the rear of side shield by detaching the clip from the metal bracket on the track. Partially flex the side shield at the rear to obtain access to the recliner handle clip. Remove the recliner handle clip (shown removed for clarity) and the recliner handle.







3. If equipped, remove the lumbar adjust knob.
4. Remove the seat control switch knob.
5. Remove the side shield control panel.
6. Remove the 2 screws and the seat control switch.
7. To install, reverse the removal procedure.